Integrating a web-based system with business processes in closed loop supply chains

Closed Loop Supply Chains include operations for physical collection of end-of-use products, selection based on their configuration and/or condition and decision making for reuse, remanufacturing or recycling. Uncertainty factors regarding the time, place of origin, and status of returns introduce many difficulties in planning these operations. With the aim to minimize such problems, this paper presents an architecture for virtual reverse logistics networks and an implementation for end-of-use PCs. The virtual reverse logistics network for PCs relies on E-commerce and WWW technologies for remote monitoring and benchmarking, instead of physical transportation and inspection. A configuration monitoring and benchmarking agent screens the computer that is about to enter the end-of-use stream and registers the data in the system’s databases. The virtual reverse logistics network regards all incoming PCs as submitted offers. Also, users or agents may explicitly register requests for PCs or modules. Offers are matched to requests with a decision support system to provide recommendations for reuse, remanufacturing or recycling of end-of-use PCs. An electronic marketplace matches requests and offers. The proposed architecture diminishes the uncertainty factors and provides us with an understanding on what is missing and it is likely to have a positive impact to the development of virtual reverse logistics networks for computers and other equipment with embedded logic.business processes;Closed Loop Supply Chains;virtual reverse logistics networks;web-based system

From e-trash to e-treasure: how value can be created by the new e-business models for reverse logistics

Reverse logistics, that is, all operations related to the reuse of used products, excess inventory and packaging materials, gain increasing attention globally both for their promising financial potentials, the sustainable growth alternative they offer and the environmental positive impact they have. In this paper, we introduce reverse logistics and we explain how the adoption of e-commerce provides new possibilities to existing business models and what are the new e-business models in reverse logistics that have emerged. We compare these three new e-business models, namely, returns aggregators, specialty locators and integrated solution providers on a number of aspects and identify keys for their competitive advantage. Finally, we discuss conceptual and actual opportunities for these e-business models to thrive and advance and present some e-commerce tools that are being developed with the aim to address the distributed, dynamic and knowledge-intensive aspects of applications that contribute to the advancement of e-businesses in the field of reverse logistics.e-commerce;Reverse logistics;e-business models

Design Principles for Closed Loop Supply Chains

In this paper we study design principles for closed loop supply chains. Closed loop supply chains aim at closing material flows thereby limiting emission and residual waste, but also providing customer service at low cost. We study 'traditional' and 'new' design principles known in the literature. It appears that setting up closed loop supply chains requires some additional design principles because of sustainability requirements. At the same time however, we see that traditional principles also apply. Subsequently we look at a business situation at Honeywell. Here, only a subset of the relevant design principles is applied. The apparent low status of reverse logistics may provide an explanation for this. To some extent, the same mistakes are made again as were 20 years ago in, for instance, inbound logistics. Thus, obvious improvements can be made by applying traditional principles. Also new principles, which require a life cycle driven approach, need to be applied. This can be supported by advanced management tools such as LCA and LCC.reverse logistics;case-study;closed loop supply chains

Integrating a web-based system with business processes in closed loop supply chains

Closed Loop Supply Chains include operations for physical collection of end-of-use products, selection based on their configuration and/or condition and decision making for reuse, remanufacturing or recycling. Uncertainty factors regarding the time, place of origin, and status of returns introduce many difficulties in planning these operations. With the aim to minimize such problems, this paper presents an architecture for virtual reverse logistics networks and an implementation for end-of-use PCs. The virtual reverse logistics network for PCs relies on E-commerce and WWW technologies for remote monitoring and benchmarking, instead of physical transportation and inspection. A configuration monitoring and benchmarking agent screens the computer that is about to enter the end-of-use stream and registers the data in the system’s databases. The virtual reverse logistics network regards all incoming PCs as submitted offers. Also, users or agents may explicitly register requests for PCs or modules. Offers are matched to requests with a decision support system to provide recommendations for reuse, remanufacturing or recycling of end-of-use PCs. An electronic marketplace matches requests and offers. The proposed architecture diminishes the uncertainty factors and provides us with an understanding on what is missing and it is likely to have a positive impact to the development of virtual reverse logistics networks for computers and other equipment with embedded logic

Design Principles for Closed Loop Supply Chains

In this paper we study design principles for closed loop supply chains. Closed loop supply chains aim at closing material flows thereby limiting emission and residual waste, but also providing customer service at low cost. We study 'traditional' and 'new' design principles known in the literature. It appears that setting up closed loop supply chains requires some additional design principles because of sustainability requirements. At the same time however, we see that traditional principles also apply. Subsequently we look at a business situation at Honeywell. Here, only a subset of the relevant design principles is applied. The apparent low status of reverse logistics may provide an explanation for this. To some extent, the same mistakes are made again as were 20 years ago in, for instance, inbound logistics. Thus, obvious improvements can be made by applying traditional principles. Also new principles, which require a life cycle driven approach, need to be applied. This can be supported by advanced management tools such as LCA and LCC

From e-trash to e-treasure: how value can be created by the new e-business models for reverse logistics

Reverse logistics, that is, all operations related to the reuse of used products, excess inventory and packaging materials, gain increasing attention globally both for their promising financial potentials, the sustainable growth alternative they offer and the environmental positive impact they have. In this paper, we introduce reverse logistics and we explain how the adoption of e-commerce provides new possibilities to existing business models and what are the new e-business models in reverse logistics that have emerged. We compare these three new e-business models, namely, returns aggregators, specialty locators and integrated solution providers on a number of aspects and identify keys for their competitive advantage. Finally, we discuss conceptual and actual opportunities for these e-business models to thrive and advance and present some e-commerce tools that are being developed with the aim to address the distributed, dynamic and knowledge-intensive aspects of applications that contribute to the advancement of e-businesses in the field of reverse logistics

An explanatory study on electronic commerce for reverse logistics.

In this paper we consider the role Electronic Commerce plays and can play for Reverse Logistics. After short introductions to electronic commerce and reverse logistics, we give an overview of existing internet sites for reverse logistics. These sites can be classified as electronic markets, supply of used parts and complete reverse logistic solutions. Finally we draw some lines to the future

Lot Size Scheduling Using Fuzzy Numbers

Due to imprecision that is often inherent in the estimates of future demand for various products in a batch type production system, there are cases where the lot sizing problem may be more naturally treated using fuzzy concepts. Triangular fuzzy sets may be employed in order to represent qualitative estimates that are expressed linguistically. In this paper the above approach is introduced in order to derive an appropriate number of production runs and the corresponding lot sizes. Keywords: Fuzzy sets, Production Planning, Lot size Scheduling. Introduction This paper is concerned with the problem of lot sizing in a batch-type production system, i.e., a type of production which lies between job shop and flow shop production. In such systems the manager has to determine the lot size for a batch to be produced at one time as well as to schedule the batch on the resources. Lot sizing is dependent on two conflicting kinds of costs: the setup and the inventory holding costs. Small lot sizes ..

Preventive maintenance and upgrade system: Optimizing the whole performance system by components' replacement or rearrangement

A decision-making model for reassembling different deteriorating subsystems and components of a complex system from used and new parts is proposed. The objective is to find the proper reassembly policies in a period of time so as to maximize the systems' overall performance values, under limited budget, and reassembly and compatibility constraints. Environmental gains are incurred from these policies, since the used components' life cycle, at least in some cases, is extended instead of ending by entering the waste stream. A stochastic dynamic programming approach is proposed, and an example in the case of personal computers is presented.

Modeling Negotiations in Group Decision Support Systems

. Group decision making processes are usually characterized by multiple goals and conflicting arguments, brought up by decision makers with different backgrounds and interests. This paper describes a computational model of negotiation and argumentation, by which participants can express their claims and judgements, aiming at informing or convincing. The model is able to handle inconsistent, qualitative and incomplete information in cases where one has to weigh multiple criteria for and against the selection of a certain course of action. It is implemented in Java, the aim being to deploy it on the World Wide Web. The basic objects in our terminology are positions, issues, arguments pro and con, and preference relations. The paper describes procedures for consistency checking, preference aggregation and conclusion of issues under discussion. The proposed model combines concepts from various well-established areas, such as Multiple Criteria Decision Making, nonmonotonic reasoning and cog..